- 13" × 29-1/2" turning capacity, 1-1/2" (38mm) spindle bore.
- Gears are made of alloy steel and hardened and precision ground.
- 6" self-centering 3-jaw manual chuck
- 12 steps spindle speeds from 60 - 1800 rpm
- Unique handle for switching longitudinal feeding and cross feeding.
- Automatic longitudinal and cross feeding.
- Can cut both metric and inch threads.
- Slideways are hardened and precision ground. And to ensure the lightweight and sensitive operation, plastic-iron slideways are also applied on the lathe. (Note: Plastic-iron slideways mean that the surfaces in contact with the slideways are pasted with a layer of special plastic, so it's the plastic contact with the iron slideways, it will reduce the ware on the slideways.)
- An operating lever to switch the spindle forward and reverse quickly.
- Comes with thread chasing dial for easier thread turning.
- Left side floor stand has three drawers for easy storage.
- Compound slider with ‘T’ slots.
- Chuck guard, tool post guard.
- Oil pan included.
- Steady rest and follow rest brace the shaft and prevent wobbling to ensure high accuracy.
- Coolant system consists of a reservoir and pump in the base plus a hose you can point as needed.
- Work light comes standard.
- AC power input: 110/220V, single phase, 60Hz
|Max. Swing over Bed||13" (330mm)|
|Max. Swing over Carriage||8-21/32" (220mm)|
|Bed Width||6-19/64" (160mm)|
|Distance between Centers||29-1/2" (750mm)|
|Chuck||6" 3-jaw manual chuck|
|Spindle Bore||1-1/2" (38mm)|
|Spindle Motor||1.5 hp (1.1 kW)|
|Number of Spindle Speeds||12|
|Range of Spindle Speeds||60 - 1,800 rpm|
|Tailstock Quill Travel||3-11/32" (85mm)|
|Tailstock Quill Diameter||1-17/64" (32mm)|
|Tailstock Quill Taper||MT-3|
|Tool Post Travel||3-15/16" (100mm)|
|Cross Travel||6-19/64" (160mm)|
|Longitudinal Travel||26-49/64" (680mm)|
|Range of Cross Feed||0.0018 - 0.0236 ipr (0.045 - 0.6 mm/r)|
|Range of Longitudinal Feed||0.0039 - 0.059 ipr (0.1 - 1.5 mm/r)|
|Tool Size||5/8" × 5/8" (16 × 16 mm)|
|Number of Inch Threads||23|
|Range of Inch Threads||9 - 40 TPI|
|Number of Metric Threads||15|
|Range of Metric Threads||0.5 - 4 mm|
|Steady Rest Ability||1-37/64" (40mm)|
|Follow Rest Ability||1-37/64" (40mm)|
|AC Power Input|
110/220V, 1-phase, 60Hz(Prewired 110V, 1-phase, 60Hz)